Skip to content
FAQ Shipping Policy contact@hydronicsdepotinc.com
PROCON 102E125F11XX - 3/8" NPT Brass Rotary Vane Pump Series 2
Brass Body

PROCON 102E125F11XX - 3/8" NPT Brass Rotary Vane Pump Series 2

Premium Rotary Vane Pump | Made in Italy

$239.99 - $239.99
$239.99
$239.99 - $239.99
$239.99

Lead time: Approximately 2-3 weeks

TECHNICAL SPECIFICATIONS

Have A Question? - Contact Us

Technical Information
Body Material Brass
Port Size 3/8" NPT
Mounting Type Bolt-On
Drive Configuration Single Flat
Flow Rate 125 GPH / 375 LPH
Elastomer EPDM/Nitrile
Seal Type
Non Balances Ceramic/Carbon
Rotation Clockwise
Internal Component Material

Carbon
Valve Configuration
No Relief Valve

 

Operating Range
Maximum Mechanical Power Requirement: 0.57hp (425W)
Maximum Operating Pressure: 250psi
Max Static Pressure: 100 psi   
Operation Fluid Temperature Range: -4°F (-20°C) - 160°F (71°C)
Max Fluid Viscosity: 100 cP
Max Sound Level: 60dB(a)        
Max Discharge Pressure: 250 psi
Min/Max Speed: 1000 - 2400 RPM
Dry Suction Lift: 3.3 ft
Wet Suction Lift: 6.6 ft
Fluid Acidity: 6 pH
Maximum Total Dissolved Solids (TDS): 5000 ppm

Net Weight: 2.29 lb
APPLICATIONS

Suitable for use in a variety of industries including

SERIES 2 ROTARY VANE PUMP BOLT-ON STYLE "E" MOUNTING 3/8" NPT PORTS

  • Consistent flow rate across variable pressures
  • Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
  • No Relief Valve
  • Brass Housing Material
  • NPT 3/8" Inlet and Outlet Connections
  • Constructed with EPDM/Nitrile Elastomers
  • Flowrate of 125GPH (375LPH)*
  • Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
  • Maximum Mechanical Horsepower required 0.57hp (425W)¹


* GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz
¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)
Shipping Protection
Protection Icon
Shipping Protection
Enhance the protection of your shipment with our shipping insurance, guarding it against loss during shipping.

Certain restrictions apply.

Starting at only $5
Valve Identification

Identifying Our Valve

Identifying ODE part numbers is crucial for several reasons. First and foremost, it ensures that you are ordering the correct valve for your specific application. ODE offers a wide range of valves, each designed for different purposes. By identifying the part number, you can be confident that you are getting the right valve that meets your requirements.

Part Number on the Body

The ODE part number is typically engraved or printed on the valve body. Look for a series of alphanumeric characters that uniquely identify the valve model. The part number is usually located on the side or the bottom of the valve body. In some cases, it may also be found on the valve tag or label.

Additional Info Image

  • Series

    The first few characters of the part number represent the valve series. This indicates the general type or category of the valve, such as solenoid valves, proportional valves, or pressure regulators.

  • Port Size

    The next set of characters denotes the valve size. This refers to the physical dimensions of the valve, such as the port size.

  • Sealing Material

    Following the size, there may be additional characters that indicate the valve's specific sealing material.

Learn more →
Free shipping

Free standard shipping on select orders.

Give Us A Call

+1 (800)-936-2819

volume discount

Based on quantity and product

premium quality

Our products are made in Italy

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare