Skip to content
Looking for ASCO, Burkert, GC, Jefferson, or Parker solenoid valve replacements? Switch to ODE—we've got you covered. Get in touch with us at contact@hydronicsdepotinc.com or call 1-800-936-2819.
Looking for ASCO, Burkert, GC, Jefferson, or Parker solenoid valve replacements? Switch to ODE—we've got you covered. Get in touch with us at contact@hydronicsdepotinc.com or call 1-800-936-2819.
FAQ Shipping Policy contact@hydronicsdepotinc.com
PROCON 101A015A12BC- 3/8" NPT Brass Rotary Vane Pump Series 1
Brass Body

PROCON 101A015A12BC - 3/8" NPT Brass Rotary Vane Pump Series 1

Premium Rotary Vane Pump | Made in Italy

$0
$155.99 - $155.99
$155.99
$155.99 - $155.99
$155.99

Lead time: Approximately 2-3 weeks

TECHNICAL SPECIFICATIONS

Have A Question? - Contact Us

Technical Information
Body Material Brass
Port Size 3/8" NPT
Mounting Type Clamp-On
Drive Configuration Double Flat
Flow Rate 15 GPH / 45 LPH
Elastomer EPDM / Nitrile
Seal Type
Balances Silicon Carbide/Hard Carbon
Rotation Clockwise
Internal Component Material Carbon
Internal Component Clearance
Special Clearance for High Temperature Applications
Valve Type
Solid- Ultem
Valve Configuration
Standard-Non External adjust

 

Operating Range
Maximum Mechanical Power Requirement: 0.19hp (142W)¹
Maximum Operating Pressure: 60 psi
Relief Valve Set Pressure Range:
60 to 99psi (4 to 7 bar)
Max Static Pressure: 100 psi
Operation Fluid Temperature Range: -4°F (-20°C) - 194°F (90°C)
Max Fluid Viscosity: 100 cP
Max Sound Level: 60dB(a)
Max Discharge Pressure: 250 psi
Min/Max Speed: 1000 - 2400 RPM
Dry Suction Lift: 3.3 ft
Wet Suction Lift: 6.6 ft
Fluid Acidity: 6 pH
Maximum Total Dissolved Solids (TDS): 5000 ppm

¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250 psi (17.5bar)


Motor Performance
Motor Design  IMB3

 

Net Weight: 2.4 lb
APPLICATIONS

Suitable for use in a variety of industries including

Product Details:

  • Consistent flow rate across variable pressures
  • Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
  • Internal Relief Valve Standard-Non External adjust configuration
  • Integral Strainer for debris removal from pumping fluid
  • Brass Housing Material
  • NPT 3/8" Inlet and Outlet Connections
  • Constructed with EPDM/Nitrile Elastomers
  • Flowrate of 15GPH (45LPH)*
  • Fluid Operating Temperature of between -4°F to 194°F (-20°C to 90°C)
  • Maximum Mechanical Horsepower required 0.19hp (142W)¹

* GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)
 More payment options
Shipping Protection
Protection Icon
Shipping Protection
Enhance the protection of your shipment with our shipping insurance, guarding it against loss during shipping.

Certain restrictions apply.

Starting at only $5
Valve Identification

Identifying Our Valve

Identifying ODE part numbers is crucial for several reasons. First and foremost, it ensures that you are ordering the correct valve for your specific application. ODE offers a wide range of valves, each designed for different purposes. By identifying the part number, you can be confident that you are getting the right valve that meets your requirements.

Part Number on the Body

The ODE part number is typically engraved or printed on the valve body. Look for a series of alphanumeric characters that uniquely identify the valve model. The part number is usually located on the side or the bottom of the valve body. In some cases, it may also be found on the valve tag or label.

Additional Info Image

  • Series

    The first few characters of the part number represent the valve series. This indicates the general type or category of the valve, such as solenoid valves, proportional valves, or pressure regulators.

  • Port Size

    The next set of characters denotes the valve size. This refers to the physical dimensions of the valve, such as the port size.

  • Sealing Material

    Following the size, there may be additional characters that indicate the valve's specific sealing material.

Learn more →
Free shipping

On orders over $250

Give Us A Call

+1 (800)-936-2819

volume discount

Based on quantity and product

premium quality

Our products are made in Italy

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare